Irrigation

Irrigation engineered for Central Florida soil and climate.

Most of what fails in a Florida irrigation system fails for the same reasons: head spacing that ignores wind drift, pressure that exceeds nozzle spec, and soil profiles the original installer never measured. We design for the place we're standing in.

Florida State Certified Irrigation ContractorSCC131152943

Lawn sprinkler in operation, fine spray catching the light over green turf.

What's included

The full irrigation scope of work.

  • System design & installation

    Pressure-balanced zones, head-to-head spacing, full coverage by design — not by hope.

  • Repair & troubleshooting

    Diagnose the actual cause, not the obvious symptom. Most pressure problems aren't pressure problems.

  • Smart Wi-Fi controllers

    Hunter, Rain Bird, Rachio installation and programming. Sensors integrated and tested.

  • Drip & micro-irrigation

    Beds, containers, and water-restricted plantings where overhead spray would waste.

  • Pump services

    Well and lake water, jet and submersible, sized for the actual demand.

  • Mainline & lateral repair

    Locate, expose, fix — without trenching the entire yard.

  • Valve service

    Diaphragm, solenoid, and isolation valve repair and replacement.

  • Rain & soil moisture sensors

    Required by Florida statute on new systems. Integrated with smart controllers.

  • Sprinkler head replacement

    MP rotators, fixed sprays, full rotors — matched to the original spec or upgraded.

  • Winterization

    On request for snowbird-occupied properties.

  • Water audits

    Quantify what your system delivers vs. what's billed. Often the bigger savings.

Approach

Most irrigation problems aren't irrigation problems.

A failing zone is usually a head spacing issue, a pressure mismatch, or a soil profile the original installer never measured. Florida sand drains in minutes; clay subsoil holds water for days. Designing for one and ignoring the other is why so many systems water the air and starve the roots.

We measure before we install, and we diagnose before we replace. That's the difference 35 years of Central Florida work makes — and the only reason a state certification is worth what it costs.

Rotor head — typical 12,000 sf residential zone, Central Florida soil profileTHROW ARC ~ 32 FT RADIUSROTOR HEADTURF ROOT — 0–6"SAND — 6–18"CLAY / HARDPANLATERAL — 1" PVC

Side view, residential rotor zone, sandy-loam over clay subsoil — a typical Lake and Sumter County profile.

Florida specifics

Sand on top. Clay underneath. Plan for both.

Central Florida is split across two water management districts — SJRWMD east of the divide, SWFWMD west — and each runs its own watering schedule, restrictions, and residential rebate programs. We work within both.

Statute requires rain sensors on new systems. Soil moisture sensors are not required, but they're the single biggest water-saving upgrade most established systems can make. We'll tell you whether yours qualifies for a district rebate before we quote it.

Irrigation head misting a lawn at golden hour, backlit spray catching the evening light

Water where the roots are — heads set to spec, timed to district schedules.

In detail

What each part of the practice covers.

  • Design & installation

    We start with the property — soil, topography, prevailing wind, sun exposure — and design backwards from coverage requirements to head selection, pipe sizing, and zone breakdown. Built once, correctly, beats rebuilt twice.

  • Repair & troubleshooting

    A failing zone usually has a layered problem: a head out of spec, a pressure mismatch upstream, and a controller program nobody updated since installation. We diagnose all three before swapping any parts.

  • Smart controllers

    Modern Wi-Fi controllers (Hunter Hydrawise, Rain Bird ESP-Me, Rachio) cut water bills 20–40% when programmed correctly. We install, integrate sensors, and set seasonal adjustments that follow Florida watering restrictions.

  • Drip & micro-irrigation

    For beds, containers, foundation plantings, and any property under SWFWMD or SJRWMD watering restrictions, low-volume drip and micro-spray deliver water to roots without the wind-drift losses of overhead spray.

Florida State Certified Irrigation Contractor

Credential in context

Florida State Certified Irrigation Contractor

The highest level of irrigation contractor licensing in Florida — held by a small minority of contractors statewide. The certification covers design and installation work that an unlicensed handyman is not legally permitted to perform.

License SCC131152943

Get in touch

Talk to Ian.

Calls reach the principal directly during business hours. We’ll ask what you’re trying to solve and tell you whether we’re the right contractor for it.